List of publications for 2023

KOLOMÝ, Š.; SEDLÁK, J.; ZOUHAR, J.; SLANÝ, M.; BENČ, M.; DOBROCKÝ, D.; BARÉNYI, I.; MAJERÍK, J. Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting. Materials, 2023, 3, 1-18, 1996-1944.

SEDLÁK, J.; JOSKA, Z.; JÁNSKÝ, J.; ZOUHAR, J.; KOLOMÝ, Š.; SLANÝ, M.; ŠVÁSTA, A.; JIROUŠEK, J. Analysis of the Mechanical Properties of 3D-Printed Plastic Samples Subjected to Selected Degradation Effects. Materials, 2023, 8, 1-19, 1996-1944.

OPĚLA, P.; BENČ, M.; KOLOMÝ, Š.; JAKŮBEK, Z.; BERANOVÁ, D. High Cycle Fatigue Behaviour of 316L Stainless Steel Produced via Selective Laser Melting Method and Post Processed by Hot Rotary Swaging. Materials, 2023, 9, 1-21, 1996-1944.

MYŠKA, M.; BOŘIL, P.; KRUTIŠ, V.; KAŇA, V.; ZÁDĚRA, A. Precipitation of Sigma and Chi Phases in Cast Standard Duplex Stainless Steel. Archives of Foundry Engineering, 2023, 2, 29-34, 2299-2944.

GAMANOV, Š.; LUPTÁKOVÁ, N.; BOŘIL, P.; JARÝ, M.; MAŠEK, B.; DYMÁČEK, P.; SVOBODA, J. Mechanisms of plastic deformation and fracture in coarse grained Fe-10Al-4Cr-4Y2O3 ODS nanocomposite at 20-1300°C. Journal of Materials Research and Technology-JMR&T, 2023, 1, 4863-4874, 2214-0697.

ŠMALC, J.; VONČINA, M.; MRVAR, P.; BALAŠKO, T.; KRUTIŠ, V.; PETRIČ, M. The Influence of Foundry Scrap Returns on Chemical Composition and Microstructure Development of AlSi9Cu3 Alloy. Crystals, 2023, 5, 1-13, 2073-4352.

KÉPEŠ, E.; VRÁBEL, J.; KAŇA, V.; ZÁDĚRA, A.; DE GIACOMO, A.; POŘÍZKA, P.; KAISER, J. Quantification of alloying elements in steel targets: The LIBS 2022 regression contest. Spectrochimica Acta Part B, 2023, 106710, , 0584-8547.

WANG, Z.; ZHANG, Y.; LIOGAS, K.; CHEN, J.; VUGHAN, G.; KOCICH, R.; KUNČICKÁ, L.; UZUN, F.; YOU, Z.; KORSUNSKY, A. In situ synchrotron X-ray diffraction analysis of two-way shape memory effect in Nitinol. Materials Science and Engineering A, 2023, 145226, , 0921-5093.

VAŠKO, A.; UHRÍČIK, M.; KAŇA, V. FATIGUE RESISTANCE AND OTHER UTILITY PROPERTIES OF NiMn-TYPE OF AUSTENITIC NODULAR CAST IRON. ARCHIVES OF METALLURGY AND MATERIALS, 2023, 2, 563-569, 1733-3490.

SEDLÁK, J.; ZOUHAR, J.; KOLOMÝ, Š.; SLANÝ, M.; NEČESÁNEK, E. Effect of high-speed steel screw drill geometry on cutting performance when machining austenitic stainless steel. Scientific Reports, 2023, 1, 1-13, 2045-2322.

MAJERÍK, J.; SLANÝ, M.; CHOCHLIKOVA, H.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; BARÉNYI, I.; KOLOMÝ, Š.; ESCHEROVA, J. Analysis of the technological process of welding a membrane wall with Inconel 625 nickel alloy. International Journal of Advanced Manufacturing Technology, 2023, 6, 3031-3048, 1433-3015.

DEVI, C.; MAHALINGAM, S. K.; ČEP, R.; KOUŘIL, K. Effect of Cryo-Treated Cutting Tool End Milling on Custom 450 Stainless Steel. Materials, 2023, 13, , 1996-1944.

PEŠIČKA, J.; KRATOCHVÍL, P.; KRÁL, R.; VESELY, J.; JAČA, E.; PREISLER, D.; DANIŠ, S.; ČAMEK, L.; MINÁRIK, P. Structure of Complex Concentrated Alloys Derived from Iron Aluminide Fe3Al. Materials, 2023, 15, , 1996-1944.

PÍŠKA, M.; VNUKOVÁ, Z.; SEDLÁČEK, J. Účinek fullerenových částic WS2 na tribologii tváření kovových materiálů. TECH MAGAZÍN, 2023, 4, 41-43, 1804-5413.

SMYK, E.; GIL, P.; JOPEK, M. PIV measurements of axisymmetric synthetic jet velocity. In AIP Conference Proceedings. AIP Conference Proceedings, 2023, , 020021-1 (020021-7), 1551-7616.

KUPČÁK, R.; ZOUHAR, J.; VILIŠ, J.; GREGOR, L.; HRUŠECKÁ, D. Precision and Dimensional Stability of Bonded Joints of Carbon-Fibre-Reinforced Polymers Parts. Applied Sciences - Basel, 2023, 18, , 2076-3417.

VILIŠ, J.; NEUMANN, V.; VÍTEK, R.; ZOUHAR, J.; POKORNÝ, Z.; MAREK, M. Analysis of Ballistic Impact of 7.62 mm FMJ M80 Rifle Projectile into Twaron/UHMWPE Composite Armor. Journal of Composites Science, 2023, 9, , 2504-477X.

BARÉNYI, I.; SLANÝ, M.; KOUŘIL, K.; ZOUHAR, J.; KOLOMÝ, Š.; SEDLÁK, J.; MAJERÍK, J. Processing of Bimetallic Inconel 625-16Mo3 Steel Tube via Supercritical Bend: Study of the Mechanical Properties and Structure. Materials, 2023, 20, , 1996-1944.

VAŠKO, A.; UHRÍČIK, M.; BELAN, J.; PASTIERČIKOVÁ, L.; KAŇA, V. Fatigue behaviour of NiCr-type of austenitic nodular cast iron. In Procedia Structural Integrity. Procedia Structural Integrity, 2023, , 129-134, 2452-3216.

ZEMČÍK, O.; SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; KOLOMÝ, Š.; KOUŘIL, K. Machinability of UMCo50 Cobalt Superalloy. Manufacturing TECHNOLOGY, 2023, 6, 1-13, 1213-2489.

KOCICH, R.; KUNČICKÁ, L.; BENČ, M. Development of microstructure and properties within oxide dispersion strengthened steel directly consolidated by hot rotary swaging. MATERIALS LETTERS, 2023, 135276, , 1873-4979.

VILIŠ, J.; VÍTEK, R.; ZOUHAR, J.; STEJSKAL, M.; NEUMANN, V. Experimental Investigation of Armour (Armox-Aramid-UHMWPE). Manufacturing TECHNOLOGY, 2023, 6, 935-948, 1213-2489.

List of publications for 2022

PÍŠKA, M.; URBANCOVÁ, K. Advanced Machining of Joint Implant UHMWPE Inserts. Machines, 2022, 11, 1-19, 2075-1702.

PECHOUŠEK, J.; KUZMANN, E.; VONDRÁŠEK, R.; OLINA, A.; VRBA, V.; KOUŘIL, L.; INGR, T.; KRÁL, P.; MASHLAN, M. Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel. Metals, 2022, 1, 1-13, 2075-4701.

KRBAŤA, M.; MAJERÍK, J.; BARÉNYI, I.; ECKERT, M.; SEDLÁK, J.; ČEP, R.; SAMARDŽIĆ, I. Dilatometric Analysis of Cooling Curves for High Strength Steel X155CrMoV12. Metalurgija, 2022, 1, 193-196, 0543-5846.

KRBAŤA, M.; MAJERÍK, J.; BARÉNYI, I.; ECKERT, M.; ČEP, R.; SEDLÁK, J.; SAMARDŽIĆ, I. Experimental Determination of Continuous Cooling Transformation Diagram for High Strength Steel X155CrMoV12. Metalurgija, 2022, 1, 185-188, 0543-5846.

KUNČICKÁ, L.; KOCICH, R.; KAČOR, P.; JAMBOR, M.; JOPEK, M. Influence of Sub Structure Development within Rotary Swaged Al–Cu Clad Conductors on Skin Effect during Transfer of Alternating Current. Materials, 2022, 2, 1-19, 1996-1944.

KUBÍČEK, J.; ZOUHAR, J.; SLANÝ, M.; HRÁDEK, J. Navařování membránové stěny niklovou slitinou Inconel 625. Zváranie - Svařování, 2022, 4, 18-21, 0044-5525.

RAJESH, P.; GUPTA, K.; ČEP, R.; RAMACHANDRAN, M.; KOUŘIL, K.; KALITA, K. Optimizing Friction Stir Welding of Dissimilar Grades of Aluminum Alloy Using WASPAS. Materials, 2022, 5, 1-12, 1996-1944.

ČILLIKOVÁ, M.; MIČIETOVÁ, A.; ČEP, R.; JACKOVÁ, M.; MINÁRIK, P.; NESLUŠAN, M.; KOUŘIL, K. Analysis of Surface State after Turning of High Tempered Bearing Steel. Materials, 2022, 5, 1-13, 1996-1944.

PÍŠKA, M.; SLIWKOVÁ, P.; VNUKOVÁ, Z.; PETRENEC, M.; SEDLÁKOVÁ, E. Exquisite Energy Savings at Cold Metal Forming of Threads through the Application of Polymers. Polymers, 2022, 6, 1-17, 2073-4360.

KRAIŠNIK, M.; ČEP, R.; KOUŘIL, K.; BALOŠ, S.; ANTIĆ, A.; MILUTINOVIĆ, M. Characterization of Microstructural Damage and Failure Mechanisms in C45E Structural Steel under Compressive Load. Crystals, 2022, 3, 1-20, 2073-4352.

ZOUHAR, J.; SLANÝ, M.; SEDLÁK, J.; JOSKA, Z.; POKORNÝ, Z.; BARÉNYI, I.; MAJERÍK, J.; FIALA, Z. Application of Carbon–Flax Hybrid Composite in High Performance Electric Personal Watercraft. Polymers, 2022, 9, 1-17, 2073-4360.

KRUTIŠ, V.; NOVOSAD, P.; ZÁDĚRA, A.; KAŇA, V. Requirements for Hybrid Technology Enabling the Production of High-Precision Thin-Wall Castings. Materials, 2022, 11, 3805-3805, 1996-1944.

VODIČKOVÁ, V.; PAZOURKOVÁ PROKOPČÁKOVÁ, P.; ŠVEC, M.; HANUS, P.; MORAVEC, J.; ČAMEK, L. The Influence of Cr Addition and Heat Treatment on Dilatometric Characteristics of Cast Fe-Al-Si Intermetallic Alloys. Manufacturing TECHNOLOGY, 2022, 1, 95-101, 1213-2489.

IZÁK, J.; SIGMUND, M. EXAMINATION OF DEGRADATION FREQUENTLY REPAIRED SHEARING AND FORMING TOOLS. MM Science Journal, 2022, 13, 5704-5712, 1805-0476.

WANG, Z.; CHEN, J.; KOCICH, R.; TARDIF, A.; DOLBNYA, I. P.; KUNČICKÁ, L.; MICHA, J.S.; LIOGAS, K.; MAGDYSYUK, O. A.; SZURMAN, I.; KORSUNSKY, A.M. Grain Structure Engineering of NiTi Shape Memory Alloys by Intensive Plastic Deformation. ACS APPL MATER INTER, 2022, 27, 31396-31410, 1944-8244.

BUDAY, J.; PROCHAZKA, D.; ZÁDĚRA, A.; KAŇA, V.; POŘÍZKA, P.; KAISER, J. Correlation of characteristic signals of laser-induced plasmas. SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY, 2022, 106476, 1-6, 1873-3565.

MÜLLER, P.; PERNICA, V.; KAŇA, V. Corrosion Resistance of Cast Duplex Steels. Archives of Foundry Engineering, 2022, 3, 5-10, 2299-2944.

GEVORKYAN, E.; CEPOVA, L.; RUCKI, M.; NERUBATSKYI, V.; MOROZOW, D.; ZUROWSKI, W.; BARSAMYAN, V.; KOUŘIL, K. Activated Sintering of Cr2O3-Based Composites by Hot Pressing. Materials, 2022, 17, , 1996-1944.

KUNČICKÁ, L.; KOCICH, R.; NÉMETH, G.; DVOŘÁK, K.; PAGÁČ, M. Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion. Additive Manufacturing, 2022, 1, 1-15, 2214-8604.

BUCHTÍK, M.; HASOŇOVÁ, M.; HORNÍK, P.; BŘEZINA, M.; DOSKOČIL, L.; MÁSILKO, J.; MRŇA, L.; FILIPENSKÝ, J.; KUBĚNA, I.; FINTOVÁ, S.; WASSERBAUER, J.; DOLEŽAL, P. Influence of laser remelting on the microstructure and corrosion behavior of HVOF-sprayed Fe-based coatings on magnesium alloy. MATERIALS CHARACTERIZATION, 2022, 12, 1-13, 1044-5803.

DOBROCKÝ, D.; POKORNÝ, Z.; JOSKA, Z.; SEDLÁK, J.; ZOUHAR, J.; MAJERÍK, J.; STUDENÝ, Z.; PROCHÁZKA, J.; BARÉNYI, I. Change in Dimensions and Surface Roughness of 42CrMo4 Steel after Nitridation in Plasma and Gas. Coatings, MDPI, 2022, 10, , 2079-6412.

SIGMUND, M.; SPICHAL, J. Possibilities of reducing the number of welds on rail vehicle doors. Scientific Reports, 2022, 1, 1-14, 2045-2322.

KUNČICKÁ, L.; KOCICH, R.; JAMBOR, M. Shear strain induced recrystallization/recovery phenomena within rotary swaged Al/Cu composite conductors. MATERIALS CHARACTERIZATION, 2022, 112399, , 1044-5803.

VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J.; VÍTEK, R.; PROCHÁZKA, J. Evaluation of ballistic resistance of thermoplastic and thermoset composite panels. In Journal of Physics: Conference Series. Journal of Physics: Conference Series, 2022, , , 1742-6596.

PÍŠKA, M.; HAVLÍKOVÁ, T.; VNUKOVÁ, Z. SUPERIOR COATING TECHNOLOGY FOR ADVANCED COLD WIRE DRAWING OF SPRING STEELS. MM Science Journal, 2022, 11, 6091-6097, 1805-0476.

OSIČKA, K.; ZOUHAR, J.; SLIWKOVÁ, P.; CHLADIL, J. Cutting Force When Machining Hardened Steel and the Surface Roughness Achieved. Applied Sciences - Basel, 2022, 22, , 2076-3417.

VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J.; JOPEK, M. Ballistic Resistance of Composite Materials Tested by Taylor Anvil Test. Manufacturing TECHNOLOGY, 2022, 5, , 1213-2489.

DOBROCKÝ, D.; POKORNÝ, Z.; VÍTEK, R.; PROCHÁZKA, J.; STUDENÝ, Z.; JOSKA, Z.; SEDLÁK, J.; SLANÝ, M.; KOLOMÝ, Š. Possibilities of Using the Duplex System Plasma Nitriding plus CrN Coating for Special Components. Coatings, MDPI, 2022, 12, 1-20, 2079-6412.

ROUČKA, J.; KAŇA, V.; KRYŠTŮFEK, T.; CHÝLKOVÁ, A. Effect of Inoculants on the Structure and Properties of Thin-Walled Ductile Iron Castings. Archives of Foundry Engineering, 2022, 4, 90-95, 2299-2944.

BOŘIL, P.; KAŇA, V.; MYŠKA, M.; KRUTIŠ, V. Improvement of Mechanical Properties of Cast Ceramic Cores Based on Ethyl Silicate. Archives of Foundry Engineering, 2022, 4, 47-52, 2299-2944.

SMYK, E.; GIL, P.; DANČOVÁ, P.; JOPEK, M. The PIV Measurements of Time-Averaged Parameters of the Synthetic Jet for Different Orifice Shapes. Applied Sciences - Basel, 2022, 1, , 2076-3417.

List of publications for 2021

KRUTIŠ, V.; ŠPRTA, P.; KAŇA, V.; ZÁDĚRA, A.; CILEČEK, J. Integration of Virtual Engineering and Additive Manufacturing for Rapid Prototyping of Precision Castings. Archives of Foundry Engineering, 2021, 1, 51-55, 2299-2944.

OSIČKA, K.; CHLADIL, J. Hardened Steels and Their Machining. Crystals, 2021, 2, 182-191, 2073-4352.

BUMBÁLEK, M.; JOSKA, Z.; POKORNÝ, Z.; SEDLÁK, J.; MAJERÍK, J.; NEUMANN, V.; KLÍMA, K. Cyclic Fatigue of Dental NiTi Instruments after Plasma Nitriding. Materials, 2021, 9, 1-11, 1996-1944.

LAKOMÁ, R.; ČAMEK, L.; LICHÝ, P.; IVANA, K.; FILIP, R.; TOMÁŠ, O. Some possibilities of using statistical methods while solving poor quality production. Archives of Foundry Engineering, 2021, 1, 18-22, 2299-2944.

ŘIHÁČEK, J.; BARTÁK, J.; PODANÝ, K.; CÍSAŘOVÁ, M.; PETERKOVÁ, E. Numerical Analysis and Optimization of the Hook Forging Process. MM Science Journal, 2021, 2, 4356-4361, 1803-1269.

ŠVEC, M.; VODIČKOVÁ, V.; HANUS, P.; PAZOURKOVÁ PROKOPČÁKOVÁ, P.; ČAMEK, L.; MORAVEC, J. Effect of Higher Silicon Content and Heat Treatment on Structure Evolution and High-Temperature Behaviour of Fe-28Al-15Si-2Mo Alloy. Materials, 2021, 11, 3031-3031, 1996-1944.

ŘIHÁČEK, J.; CÍSAŘOVÁ, M.; PETERKOVÁ, E.; PODANÝ, K. Influence of the Pressure Die Geometry on The Bent Tube Ovality. MM Science Journal, 2021, 2, 4474-4482, 1803-1269.

VARHANÍK, M.; PÍŠKA, M. THE MACHINABILITY OF INC 718 BY CERAMIC INSERTS. MM Science Journal, 2021, 2, 4483-4490, 1805-0476.

TRČKA, T.; POLZER, A. Analyzing the performance of circle segment end mill with PCD inserts with laser-machined integral chipbreaker when dry milling of additive manufactured Ti-6Al-4V titanium alloy. MM Science Journal, 2021, 2, 4434-4443, 1805-0476.

SIGMUND, M.; CICHA, T. REPLACEMENT OF MANUAL GMAW WELDING BY FCAW SEMI-AUTOMATIC WELDING. MM Science Journal, 2021, 2, 4342-4347, 1803-1269.

SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; CHLADIL, J.; JAROŠ, A.; KOUŘIL, K.; VARHANÍK, M.; MAJERÍK, J.; BARÉNYI, I.; ČEP, R. Material and Dimensional Analysis of Bimetallic Pipe Bend with Defined Bending Radii. TEHNIČKI VJESNIK - TECHNICAL GAZETTE, 2021, 3, 974-982, 1330-3651.

JOPEK, M.; FOREJT, M.; HARANT, M. Mechanical properties of aluminium alloys at high strain rate. MM Science Journal, 2021, 2, 4505-4511, 1803-1269.

MOURALOVÁ, K.; POLZER, A.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; KALIVODA, M.; FRIES, J. Multicut technology used in WEDM machining of Mar-M247. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2021, 13, 1-17, 0954-4054.

PROCHÁZKA, J.; DOBROCKÝ, D.; JOSKA, Z.; NGUYEN, H.; SEDLÁČEK, J.; SEDLÁK, J.; POLZER, A.; SLIWKOVÁ, P. Modification of Surface Structure by Diffusion Processes. ECS Transaction, 2021, 1, 371-380, 1938-6737.

NGUYEN, H.; SVOBODA, E.; SEDLÁČEK, J.; SEDLÁK, J.; POLZER, A.; SLIWKOVÁ, P. Effects of Hybrid Surface Treatment Composed of Plasma Nitriding and CrN Coating on Friction-wear Properties of Stainless Steel. ECS Transaction, 2021, 1, 309-318, 1938-6737.

KUNČICKÁ, L.; JOPEK, M.; KOCICH, R.; DVOŘÁK, K. Determining Johnson-Cook Constitutive Equation for Low-Carbon Steel via Taylor Anvil Test. Materials, 2021, 17, 1-15, 1996-1944.

DOBROCKÝ, D.; SEDLÁK, J.; JOSKA, Z.; PROCHÁZKA, J.; POKORNÝ, Z.; STUDENÝ, Z. Influence of Machining Parameters on the Surface Quality of Technical Plastics. ECS Transaction, 2021, 1, 381-389, 1938-6737.

SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; KOUŘIL, K.; POLZER, A.; POKORNÝ, Z.; JOSKA, Z.; DOBROCKÝ, D.; STUDENÝ, Z. Analysis of bimetal pipe bends with a bend of 0.7D with a cladding layer of Inconel 625. International Journal of Advanced Manufacturing Technology, 2021, 11-12, 3859-3871, 1433-3015.

ŠMAK, M.; KUBÍČEK, J.; KALA, J.; PODANÝ, K.; VANĚREK, J. The Influence of Hot-Dip Galvanizing on the Mechanical Properties of High Strength Steels. Materials, 2021, 18, 1-19, 1996-1944.

DOBROVOLNÁ, L.; VARHANÍK, M.; SEDLÁK, J.; POLZER, A.; STUDENÝ, Z. The design of a device for testing the tribological properties of knee endoprostheses. Manufacturing TECHNOLOGY, 2021, 4, 447-455, 1213-2489.

JOPEK, M. Determination of Carbon Steel Dynamic Properties. Manufacturing TECHNOLOGY, 2021, 4, 479-482, 1213-2489.

SIGMUND, M. Possibilities of Porosity Repairs after Aluminium Alloys Welding. Manufacturing TECHNOLOGY, 2021, 4, 539-543, 1213-2489.

HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L.; KALINA, L.; MARKO, M.; ŠOUKAL, F.; DVOŘÁK, R.; HERČÍK, T. Decalcification resistance of various alkaliactivated materials. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering, 2021, , 1-8, 1757-8981.

ŘIHÁČEK, J.; PETERKOVÁ, E.; CÍSAŘOVÁ, M. Improving Rotary Draw Bending Process by Changing a Geometry of the Pressure Die. Manufacturing TECHNOLOGY, 2021, 5, 668-681, 1213-2489.

POLZER, A.; SEDLÁK, J.; SEDLÁČEK, J.; BENEŠ, L.; MOURALOVÁ, K. Vertical Graphene Growth on AlCu4Mg Alloy by PECVD Technique. Coatings, MDPI, 2021, 9, 1-13, 2079-6412.

SIGMUND, M.; IZÁK, J. APPLICATION OF WC GRAINS BY DEPOSITION BRAZING. MM Science Journal, 2021, 4, 4857-4862, 1805-0476.

HARANT, M.; ŘIHÁČEK, J.; MRŇA, L. MANUFACTURING OF SANDWICH PANELS AND ITS VERIFICATION BY NUMERICAL SIMULATION. MM Science Journal, 2021, 4, 4797-4802, 1803-1269.

SIGMUND, M. Heterogenous Weld of Heat Resistant Steel With Cobalt Alloy. Manufacturing TECHNOLOGY, 2021, 5, 700-705, 1213-2489.

HERČÍK, T.; SIGMUND, M.; HRUBÝ, P. WELDABILITY OF COBALT ALLOYS BY HYBRID METHODS. MM Science Journal, 2021, 11, 4946-4953, 1805-0476.

DOSTAL, P.; SADÍLEK, M.; KUSNIR, L.; KOUŘIL, K.; ČEP, R. Increased Cutting Conditions when Machining Heat-Resistant Steel Using Replaceable Inserts. Manufacturing TECHNOLOGY, 2021, 5, 592-599, 1213-2489.

MAJERIK, J; BARENYI, I.; POKORNY, Z.; SEDLAK, J.; NEUMANN, V.; DOBROCKY, D.; JAROS, A.; KRBATA, M.; JAMBOR, J.; KUSENDA, R.; SAGAN, M.; PROCHAZKA, J. Analysis of the OCHN3MFA steel in terms of cutting forces and cutting material flank wear mechanisms in hard turning processes. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2021, 6, 1-8, 2300-1917.

List of publications for 2020

NESLUŠAN, M.; URÍČEK, J.; MIČIETOVÁ, A.; MINÁRIK, P.; PÍŠKA, M.; ČILÍKOVÁ, M. Decomposition of cutting forces with respect to chip segmentation and white layer thickness when hard turning 100Cr6. Journal of Manufacturing Processes, 2020, 1, 475-484, 1526-6125.

MOURALOVÁ, K.; HRABEC, P.; BENEŠ, L.; OTOUPALÍK, J.; BEDNÁŘ, J.; PROKEŠ, T.; MATOUŠEK, R. Verification of Fuzzy Inference System for Cutting Speed while WEDM for the Abrasion-Resistant Steel Creusabro by Conventional Statistical Methods. Metals, 2020, 1, 1-11, 2075-4701.

VOPAT, T.; SAHUL, M.; HARŠÁNI, M.; VORTEL, O.; ZLÁMAL, T. The Tool Life and Coating-Substrate Adhesion of AlCrSiN-Coated Carbide Cutting Tools Prepared by LARC with Respect to the Edge Preparation and Surface Finishing. Micromachines, 2020, 2, 1-18, 2072-666X.

MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; JANKOVÝCH, R.; FRIES, J.; VONTOR, J. Analysis of the machinability of copper alloy Ampcoloy by WEDM. Materials, 2020, 4, 1-14, 1996-1944.

ROBL, J.; SEDLÁK, J.; POKORNÝ, Z.; ŇUKSA, P.; BARÉNYI, I.; MAJERÍK, J. Analysis of advanced additive technology in direct metal laser sintering and precision casting method. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2020, 1, 109-118, 2300-1917.

POLZER, A.; ŠEBESTA, V.; TRČKA, T. 5-Axis Dry Milling of Bottom of Pocket by Ball and Circle-Segment End Mills. MM Science Journal, 2020, 1, 3740-3744, 1805-0476.

SEDLÁK, J.; VOCÍLKA, O.; SLANÝ, M.; CHLADIL, J.; POLZER, A.; VARHANÍK, M. Desing and Production of Eye Prosthesis Using 3D Printing. MM Science Journal, 2020, 3, 3806-3812, 1803-1269.

ŘIHÁČEK, J.; PETERKOVÁ, E.; CÍSAŘOVÁ, M.; KUBÍČEK, J. Comparison of FEM and FVM for the Numerical Simulation of Forging Process. MM Science Journal, 2020, 1, 3734-3739, 1805-0476.

PÍŠKA, M.; SLIWKOVÁ, P. ANALYSIS OF FORCES INDUCED BY COATED CUTTING TOOLS AT WET AND DRY GROOVING OF HARDENED STEEL. MM Science Journal, 2020, 3, 3794-3799, 1803-1269.

MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; FRIES, J. Analysis of Machinability and Crack Occurrence of Steels 1.2363 and 1.2343ESR Machined by Die-Sinking EDM. Coatings, MDPI, 2020, 4, 1-18, 2079-6412.

MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; FRIES, J. Machining of pure molybdenum using WEDM. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2020, 163, 1-13, 0263-2241.

MOURALOVÁ, K.; ZAHRADNÍČEK, R.; BENEŠ, L.; PROKEŠ, T.; HRDÝ, R.; FRIES, J. Study of micro structural material changes after WEDM based on TEM lamella analysis. Metals, 2020, 7, 1-21, 2075-4701.

MAJERÍK, J.; BARÉNYI, I.; SEDLÁK, J.; KUSENDA, R.; ECKERT, M. Microstructural analysis of examined 33NiCrMoV15 steel and investigation of its nanomechanical properties after machining. Manufacturing TECHNOLOGY, 2020, 1, 72-77, 1213-2489.

MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; FRIES, J. Precision Machining of Nimonic C 263 Super Alloy Using WEDM. Coatings, MDPI, 2020, 6, 1-20, 2079-6412.

ZÁDĚRA, A.; ET AL. The Effect of Simultaneous Si and Ti/Mo Alloying on High-Temperature Strength of Fe3Al-Based Iron Aluminides. MOLECULES, 2020, 18, 1-11, 1420-3049.

KUPČÁK, R.; ZOUHAR, J. Application of composite materials in sports optics. Manufacturing TECHNOLOGY, 2020, 2, 200-209, 1213-2489.

SEDLÁK, J.; CHLADIL, J.; ČERNÝ, M.; POLZER, A.; VARHANÍK, M.; DOBROCKÝ, D.; JOSKA, Z.; POKORNÝ, Z. Determination of mechanical properties of materials used for 3D printing. Manufacturing TECHNOLOGY, 2020, 2, 237-243, 1213-2489.

MORAVČÍK, I.; KUBÍČEK, A.; MORAVČÍKOVA DE ALMEIDA GOUVEA, L.; ADAM, O.; KAŇA, V.; POUCHLÝ, V.; ZÁDĚRA, A.; DLOUHÝ, I. The Origins of High-Entropy Alloy Contamination Induced by Mechanical Alloying and Sintering. Metals, 2020, 9, 1-15, 2075-4701.

MOURALOVÁ, K.; BEDNÁŘ, J.; BENEŠ, L.; HRABEC, P.; KALIVODA, M.; FRIES, J. The analysis of EDM electrodes wear in corners and edges. ARCH CIV MECH ENG, 2020, 5, 1-17, 1644-9665.

KAŇA, V.; KRUTIŠ, V.; BOŘIL, P.; ZÁDĚRA, A.; RIMKO, M. Influence of heat treatment and nickel content on the properties of GX4CrNi13-4 steel. ARCHIVES OF METALLURGY AND MATERIALS, 2020, 1, 37-41, 1733-3490.

MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; ZÁDĚRA, A.; FRIES, J.; KAŇA, V. WEDM used for machining high entropy alloys. Materials, 2020, 21, 1-20, 1996-1944.

POLZER, A.; VANČURA, T.; TRČKA, T. New Developed Software for Processing and Analysing of the Cutting Forces Records Verified when Machining by Modern Circle-Segment End Mills. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering, 2020, 968, 1-11, 1757-8981.

PÍŠKA, M.; SLIWKOVÁ, P.; SEDLÁČEK, J.; FOKSOVÁ, V. Tribological Performance of Graphene and Graphene Oxide Films as Solid Lubricant Layers on Tool Steel Surfaces. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering, 2020, 968, 1-9, 1757-8981.

KRUTIŠ, V.; MADAJ, M.; KOLDA, V. Virtuální prototypování – cesta k optimálnímu návrhu a výrobě odlitků. Slévárenství, 2020, 11-12, 327-333, 0037-6825.

ŘIHÁČEK, J.; ZEJDA, V.; PETERKOVÁ, E.; CÍSAŘOVÁ, M. Influence of initial hole preparation on properties and limits in hole flanging. MM Science Journal, 2020, 5, 4201-4209, 1803-1269.

VAŠKO, A.; ZATKALÍKOVÁ, V.; KAŇA, V. CORROSION RESISTANCE OF SiMo- AND SiCu-TYPES OF NODULAR CAST IRON IN NaCl SOLUTION. In System Safety: Human - Technical Facility - Environment. System Safety: Human - Technical Facility - Environment, 2020, , 191-198, 2657-5450.

List of publications for 2019

MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L. Surface and subsurface layers defects analysis after WEDM affecting the subsequent lifetime of produced components. Arabian Journal for Science and Engineering, 2019, 9, 7723-7735, 2191-4281.

MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; OTOUPALÍK, J.; FIŠEROVÁ, Z.; FIALA, Z. Micro-milling machinability of pure molybdenum. International Journal of Advanced Manufacturing Technology, 2019, 9, 4153-4165, 1433-3015.

POLZER, A.; KŘEHLÍK, L.; TRČKA, T. End Mills with PCD Inserts Including Integral Chip Breaker. MM Science Journal, 2019, 1, 2808-2813, 1805-0476.

CHLADIL, J., SEDLáK, J., RYBářOVá, E. R., KUčERA, M., AND DADO, M. Cutting conditions and tool wear when machining wood-based materials. BIORESOURCES, 2019, 2, 3495-3505, 1930-2126.

BARÉNYI, I.; MAJERÍK, J.; POKORNÝ, Z.; SEDLÁK, J.; BEZECNÝ, J.; DOBROCKÝ, D.; JAROŠ, A.; ECKERT, M.; JAMBOR, J.; KUSENDA, R. Material and technological investigation of machined surfaces of the OCHN3MFA steel. KOVOVE MATERIALY-METALLIC MATERIALS, 2019, 2, 131-142, 1338-4252.

PÍŠKA, M.; BUČKOVÁ, K. Advanced knee implants for the third millenium. Journal of Material Sciences & Enginering, 2019, March 2019, 20-21, 2169-0022.

BARÉNYI, I.; MAJERÍK, J.; BEZECNÝ, J.; KRBAŤA, M.; SEDLÁK, J.; JAROŠ, A. Material and Technological Aspects while Processing of Selected Ultra High Strength Steel. Manufacturing TECHNOLOGY, 2019, 2, 184-189, 1213-2489.

ŘIHÁČEK, J.; PODANÝ, K.; FALTÝNEK, F. Prediction of the Stamped Part Thinning Depending on Its Geometry and Blank Material. Manufacturing TECHNOLOGY, 2019, 2, 314-320, 1213-2489.

MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; MATOUŠEK, R.; HRABEC, P.; FIŠEROVÁ, Z.; OTOUPALÍK, J. Using a Design of Experiment for a Comprehensive Analysis of the Surface Quality and Cutting Speed in WED-Machined Hadfield Steel. Journal of Mechanical Science and Technology, 2019, 5, 2371-2386, 1976-3824.

MRŇA, L.; ŘIHÁČEK, J.; HORNÍK, P.; ŠARBORT, M. Solar Absorber with a Structured Surface – a Way to Increase Efficiency. Acta Polytechnica (on-line), 2019, 2, 134-143, 1805-2363.

KAŇA, V.; PERNICA, V.; ZÁDĚRA, A.; KRUTIŠ, V. Comparison of methods for determining the ferrite content in duplex cast steels. Archives of foundry engineering, 2019, 2, 85-90, 1897-3310.

MOURALOVÁ, K.; ZAHRADNÍČEK, R.; BEDNÁŘ, J. Study of vertical graphene growth on silver substrate based on design of experiment. Diamond and Related Materials, 2019, 3, 1-10, 0925-9635.

SIGMUND, M. Tandem robotic FCAW welding. MM Science Journal, 2019, 06, 2920-2927, 1803-1269.

PÍŠKA, M.; BUČKOVÁ, K. Analysis of machined electron beam treated Ti6Al4V-ELI implant surfaces. Advanced Materials Letters, 2019, 6, 381-385, 0976-3961.

ZEMČÍK, O.; SEDLÁK, J. Application of Linear Optimization on Parameters of 3D FDM Print. TEHNIČKI VJESNIK - TECHNICAL GAZETTE, 2019, 4, 1164-1170, 1330-3651.

PÍŠKA, M. Advanced knee implants for the third millennium. Journal of Material Sciences & Enginering, 2019, , 1, 2169-0022.

JAROŠ, A.; SEDLÁK, J.; JAŠEK, P. The Investigation of the Influence of Modern Coating Applied to the Cutting Inserts During Machining. Manufacturing TECHNOLOGY, 2019, 4, 589-595, 1213-2489.

MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L. Analysis of the oxide occurrence on WEDM surfaces in relation to subsequent surface treatments. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, 3, 721-733, 0954-4062.

ROUČKA, J.; KRUTIŠ, V.; KAŇA, V.; PROCHÁZKA, J.; NEDELOVÁ, K. The Influence of Lamellar Graphite Cast Iron Annealing on Hardness and Structure. Archives of foundry engineering, 2019, 4, 105-112, 1897-3310.

SIGMUND, M. Plasma overlay welding of cobalt alloy. MM Science Journal, 2019, 10, 2982-2986, 1803-1269.

TRČKA, T.; POLZER, A.; PALOVČÍK, J.; ŠOUKAL, F. End Milling of Ti-6Al-4V Alloy by PCD Inserts with Laser-Machined Integral Chipbreaker. MM Science Journal, 2019, 3, 2987-2997, 1805-0476.

MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L.; SLIWKOVÁ, P. Analysis of subsurface defects occurrence in abrasion resistant Creusabro steel after WEDM including the study of morphology and surface topography. MACHINING SCIENCE AND TECHNOLOGY, 2019, 6, 1-18, 1091-0344.

MAJERÍK, J.; BARÉNYI, I.; SEDLÁK, J. Investigation of Flank Wear when Finish Turning of High Strength Steel with CBN Cutting Insert. Inteligent Manufacturing and Automation: Focus on Young Researches and Scientists, 2019, 1, 0215-0222, 1726-9679.

ČAMEK, L.; KAŇA, V.; ZÁDĚRA, A.; MYŠKA, M. Ovlivňování vlastností martenzitických korozivzdorných ocelí na odlitky. Slévárenství, 2019, 9-10, 299-302, 0037-6825.

OHNIŠŤOVÁ, P.; PÍŠKA, M.; PETRENEC, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Fatigue Life of 7475-T7351 Aluminum After Local Severe Plastic Deformation Caused by Machining. Materials, 2019, 21, 1-23, 1996-1944.

MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L.; BEDNÁŘ, J. The Influence of WEDM Parameters Setup on the Occurrence of Defects when Machining Hardox 400 Steel. Materials, 2019, 22, 1-15, 1996-1944.

OLINA, A.; PÍŠKA, M.; PETRENEC, M.; HERVOCHES, C.; BERAN, P.; PECHOUŠEK, J.; KRÁL, P. Assessment of Retained Austenite in Fine Grained Inductive Heat Treated Spring Steel. Materials, 2019, 24, 1-17, 1996-1944.

ŘIHÁČEK, J.; PODANÝ, K.; KABILKA, D.; MRŇA, L. Analysis of Bar feeding Into the Drawing Tool. MM Science Journal, 2019, 5, 3544-3548, 1805-0476.

OHNIŠŤOVÁ, P.; PÍŠKA, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; PETRENEC, M. A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading. In Procedia Structural Integrity. Procedia Structural Integrity, 2019, , 469-474, 2452-3216.